For this tutorial we will use the same Kinematics as in the Plate Cam Translating Follower  If you have purchased the Barrel Cam Translating follower dll your Geometry Input Form will have in the Cam Type Radio button like this:  .  You can also view this tutorial here.

1. Select Brl from the Cam Type list and Translating-roller from the Followers drop-down.  Select Groove (Box) from Face or Groove and the Geometry Form will look like this:

   Cam Picture:

2.  The data we will use is as seen below:

3.  In the Geometry Form is looks like this:

4.  Click Cam Drawing  and you will get this:

5.  You can also watch the video:  Barrel Translator