Path to the CNC subroutines

Path to subroutines for drilling, entry and exit.

Default cutter diameter

Default cutter diameter.  This will normally be the diameter that was used in the Geometry input

CNC Header file information

Information in the header file and where in the ASCII file it will be placed.

Allowance for the finish operation

This is the amount that will be left on the cam surface from the roughing operation for finish.

Tool clearance amount

Amount for clearance of the tool when moving over the cam/

OK Button

Click this to save the changes that have been made.

Cancel Button

Click this to cancel all changes that have been made.

Help Button

Brings up the help for the current sheet.